E-11 Blaster Rifle

E-11 Blaster Cosplay Weapon Kit for StormTroopers. This E-11 Blaster replica comes as a kit to assemble.

The E-11 blaster rifle was a light but powerful blaster rifle manufactured by BlasTech Industries.  The E-11 was standard issue for the Imperial Stormtroopers.


Shipping Details:

  • E-11 Blaster Kit is sent via Australia Post with Tracking
  • Free Shipping Worldwide

Made To Order

This E-11 Blaster Kit is custom-made once your order is placed. It may take between 4-6weeks for it to be produced and then shipped. 


Assembled and Painted Option

We offer the Blaster also painted and assembled as well.
Painted and assembled can take upto 90days to complete prior to shipping.


Important Details:

  • This E-11 Blaster Kit is Lifesize 1:1 scale.
  • The E-11 Blaster Kit DIY/Raw kit arrives in a number of pieces that need to be glued together.
  • Sanding and painting will be required to complete this E-11 Blaster


Why Buy an E-11 Blaster Kit?

Buying an E-11 Blaster kit is the better option to allow yourself to build it and to take pride in knowing you built and painted your own Blaster for your awesome Cosplay or Display.


Painting the E-11 Blaster Rifle

There are plenty of Tutorials on painting found online.
A simple Flat Black and silver (for scuff marks) is adequate. However, more detail can be painted such as Heat burns etc.

You Will Need:

  • Sandpaper
  • Stanley Knife
  • Superglue (cheap stuff works well!)
  • Paint
  • Putty

Cheat Mode:

Use XTC-3d Resin or UV Resin (about $15 a bottle) to get a real smooth finish with less work needed (it will save you hours of sanding).
0.5kg will do about 30 Blasters or 30 Helmets!  Well worth it and will store on the shelf for a couple of years!!
Tip: only mix 30ml each time and brush on very, very very lightly! Average Time To Complete: 8hrs
                                                4hrs (if you use the resin coating method)

Important Details:

  • This E-11 Blaster Rifle is Lifesize 1:1 scale. 
  • This E-11 Blaster Rifle kit arrives in a number of pieces that need to be glued together.
  • This blaster is unpainted/RAW and 3D printed in assorted colors.
  • You will need to remove left-over printing supports and/or burs.
  • Sanding and putty will be required to smooth out the pieces prior to painting and gluing. 
  • An epoxy resin coating is highly recommended.
  • Assembly will be required.
  • E-11 Blaster Rifle sent via Australia Post with Tracking